Description
Please check with your local gas supplier to determine gas pressure requirements. It is essential that you check three things;
- Match the pressure of the regulator to the pressure of your oven. For example if you’re in the USA, Ooni pizza ovens are 28mbar, therefore you need a 28mbar gas regulator.
- The connection on the propane tank to the regulator. There are two types – screw and push on.
- The clips for connecting the hose to the oven match.
What is a regulator and which one do I need?
There are two questions you need to answer in order to determine what regulator you need:
|
Different regions use different gas bottles. These different gas bottles will have different connections. The regulators which we provide with all Ooni gas products are region specific.
- When ordering one of our gas products, make sure you select the model that is compatible for the region which you wish to use your product.
US, CA, NZ, AU, ZA:
28mBar
✅Supplied and fully assembled with the Ooni product
Hose Outlet: 5/8” UNF – 18 Hose nozzle threaded terminal (supplied fully assembled)
Hose length: 0.92m Hose
Bottle Regulator: 2.8kpa (11Winch) Propane Regulator
Regulator inlet: QCC(HW-01) Left handed female thread
CY, DK, EE, FI, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS:
30mBar
Please note that 30mBar Ooni gas products are not shipped with a regulator. The range of 30mBar regulators is vast and so we thought it would be best to allow you to chose the regulator which is suitable for use with gas tanks available to you.
To you a regulator might be known as a regolatur tal-gass (MLT).
Terminal outlet: 1/4” Left handed male threaded terminal
30mBar gas-fired products are also supplied with threaded barb
Barb inlet: ¼” Left handed female threaded terminal
Barb outlet: Threaded barb suitable for hose 8-10mm diameter
You may know a regulator as a kaasusäädin (FI), gasregelaar (NL) or regulátor plynu (SK). If you have ordered one of our 30mBar gas products, you will need to source a 30mBar regulator to connect these gas products to your gas tank and get cooking!
BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI, PL, MLT:
37mBar
✅Supplied and fully assembled with the Ooni product
To you a regulator might be known as a dujų reguliatorius (LT), regolatur tal-gass (MLT) or a gāzes regulators (LV).
The regulator which is shipped with 37mBar Ooni gas products can be seen below:
Hose: 1.2m Hose
Bottle Regulator: 37mBar Propane Regulator
Regulator inlet: 27mm diameter push on style Patio gas fitting
AT, CH, DE, SK:50mBar
✅Supplied and fully assembled with the Ooni product
The regulator which is shipped with all 50mBar Ooni gas products can be seen below:
Hose: 0.9m Hose
Bottle Regulator: 50mBar Propane Regulator
Regulator inlet: 21.8 x 1/14” Left handed female thread
Further reading:
Regulators are classified into different groups depending on the millibar (mBar) of pressure which they will release when in use. We provide 28mBar, 30mBar, 37mBar and 50mBar regulators for our Ooni gas products.
As well as regulating to different mBar pressures, regulators can also be a different shape and size. In other words, not all 30mBar regulators are the same and neither are 28mBar, 27mBar or 50mBar.
Please note that our gas products themselves are also region specific and so changing the regulator will not make a product function in a region which it has not been designed for use in. For example, putting a US regulator on a UK Ooni Koda model will not make this model suitable for use in the US.
Listed above are the regulators which we ship and the countries which they are compatible for use in. If your country is seen for more than one of these millibars, please check in with your local hardware or appliance store in order to determine which gas tanks are available to you in your area.
Reviews
There are no reviews yet.